Plugin.ReClockOrNot History

Hide minor edits - Show changes to markup

Changed line 12 from:

Download: ReClockOrNot.zip (10 KB, 788 downloads)

to:

Download: ReClockOrNot.zip (13 KB, 788 downloads)

Added line 8:
Added lines 16-19:

(For NPVR 2.6, you must use ReClockOrNot-NPVR2.zip instead)

Added line 23:
Added line 33:
Added line 37:
Added line 41:
Added line 45:
Added line 50:
Added lines 52-53:

2013-10-11 : v3.13.10.11

  • Updated for NextPVR 3 (and .NET 4) compatibility
Changed lines 9-12 from:

The latest version of the ReClockOrNot plugin is v2.11.03.26, released on March 26th, 2011.

Download: ReClockOrNot.zip (5 KB, 788 downloads)

to:

The latest version of the ReClockOrNot plugin is v2.12.01.04, released on January 4th, 2012.

Download: ReClockOrNot.zip (10 KB, 788 downloads)

Changed lines 25-26 from:
to:

You can also - optionally - provide two batch files in the plugin's installation directory: SetDefault.bat and SetReClock.bat. If found, they will be run whenever ReClockOrNot changes the audio renderer and can be used to make any further tweaks you might want, such as changing the settings for an audio decoder based on whether it is being used for Live TV (without ReClock) or videos (with ReClock).

Added lines 41-42:

2012-01-04 : v2.12.01.04

  • Added support for running batch files on decoder change
Changed lines 16-17 from:

This plugin requires at least NextPVR v2.0.3. Obviously ReClock must be installed too.

to:

This plugin requires ReClock to be installed.

Changed lines 19-20 from:

For ReClockOrNot to work correctly, you must disable the option within ReClock that allows itself to be automatically loaded.

to:

For ReClockOrNot to work correctly, you must tell ReClock to never load NextPVR automatically. To do this, ensure that your ReClock settings match those highlighted in the image below.

ReClockOrNot will work automatically for .ts files and any other video file type played by NextPVR(mkv, mp4, avi, etc). If you also wish to use ReClock for DVD playback, then you must change the audio renderer within the DVD Settings tab to "ReClock Audio Renderer".

Changed lines 25-26 from:

ReClockOrNot will work automatically for .ts files and any other video file type played by NextPVR(mkv, mp4, avi, etc). If you also wish to use ReClock for DVD playback, then you must change the audio renderer within the DVD Settings tab to "ReClock Audio Renderer".

to:
Changed line 27 from:

If you require support for this plugin, then please post a message in the Plugin & Skin support forum.

to:

This plugin is discussed here: http://forums.gbpvr.com/showthread.php?50920-ReClockOrNot-Support-Thread

Changed line 26 from:

If you require support for this plugin, then please post a message in the Plugin & Skin support forum.

to:

If you require support for this plugin, then please post a message in the Plugin & Skin support forum.

Changed lines 4-5 from:

NPVR uses transport stream files (.ts) for its Live TV and recordings. If more than one audio codec is selected in the Decoders Settings tab, perhaps because you have some TV channels with MPEG audio and others with AC3 audio, then ReClock will no longer function correctly. This is because it can only work with one audio decoder at a time, but NPVR must add all the enabled decoders to the playback graph because it doesn't know in advance which ones will actually be required.

to:

NextPVR uses transport stream files (.ts) for its Live TV and recordings. If more than one audio codec is selected in the Decoders Settings tab, perhaps because you have some TV channels with MPEG audio and others with AC3 audio, then ReClock will no longer function correctly. This is because it can only work with one audio decoder at a time, but NextPVR must add all the enabled decoders to the playback graph because it doesn't know in advance which ones will actually be required.

Deleted lines 10-11:

Extract the zip's contents into C:\Users\Public\NPVR (or equivalent).

Added lines 13-14:

To install, simply extract the zip's contents into NextPVR's Data Directory.

Changed lines 16-17 from:

This plugin requires at least NPVR v2.0.3. Obviously ReClock must be installed too.

to:

This plugin requires at least NextPVR v2.0.3. Obviously ReClock must be installed too.

Changed line 23 from:

ReClockOrNot will work automatically for .ts files and any other video file type played by NPVR (mkv, mp4, avi, etc). If you also wish to use ReClock for DVD playback, then you must change the audio renderer within the DVD Settings tab to "ReClock Audio Renderer".

to:

ReClockOrNot will work automatically for .ts files and any other video file type played by NextPVR(mkv, mp4, avi, etc). If you also wish to use ReClock for DVD playback, then you must change the audio renderer within the DVD Settings tab to "ReClock Audio Renderer".

Changed lines 6-7 from:

ReClockOrNot is a small plugin that works around this situation by disabling ReClock whenever a .ts file is in use, but remain active for all other video files.

to:

ReClockOrNot is a small plugin that works around this situation by disabling ReClock whenever a .ts file is in use, but keeping it active for all other video files.

Changed lines 16-17 from:

This plugin requires at least NPVR v2.0.3. Obviously ReClock must be installed too.

to:

This plugin requires at least NPVR v2.0.3. Obviously ReClock must be installed too.

Changed lines 19-20 from:

For ReClockOrNot to work correctly, you must disable the option within ReClock that allows itself to be automatically loaded.

to:

For ReClockOrNot to work correctly, you must disable the option within ReClock that allows itself to be automatically loaded.

Changed line 32 from:

The source code for the System plugin is available on request by sending a PM to imilne.

to:

The source code for the ReClockOrNot plugin is available on request by sending a PM to imilne.

Changed lines 2-7 from:

(:description Allows ReClock to work with NPVR, by disabling it during Live TV and Recordings where it would ordinarily be incompatible with the multiple audio codecs in use simultaneously. :)

NPVR uses transport stream files (.ts) for its Live TV and recordings. If more than one audio codec is selected in the Decoders Settings tab, perhaps because you have some TV channels with MPEG audio and others with AC3 audio, then ReClock will no longer function correctly. This is because it can only work with one audio decoder at a time, but NPVR must add all the enabled decoders to the playback graph because it doesn't know in advance which ones will actually be required.

ReClockOrNot is a small plugin that works around this situation by disabling ReClock whenever a .ts file is in use, but remain active for all other video files.

to:

(:description Allows %newwin%[[http://forum.slysoft.com/forumdisplay.php?f=85|ReClock]] to work with NPVR, by disabling it during Live TV and Recordings where it would ordinarily be incompatible with the multiple audio codecs in use simultaneously. :)

NPVR uses transport stream files (.ts) for its Live TV and recordings. If more than one audio codec is selected in the Decoders Settings tab, perhaps because you have some TV channels with MPEG audio and others with AC3 audio, then ReClock will no longer function correctly. This is because it can only work with one audio decoder at a time, but NPVR must add all the enabled decoders to the playback graph because it doesn't know in advance which ones will actually be required.

ReClockOrNot is a small plugin that works around this situation by disabling ReClock whenever a .ts file is in use, but remain active for all other video files.

Changed lines 16-17 from:

This plugin requires at least NPVR v2.0.3. Obviously ReClock must be installed too.

to:

This plugin requires at least NPVR v2.0.3. Obviously ReClock must be installed too.

Changed lines 19-20 from:

For ReClockOrNot to work correctly, you must disable the option within ReClock that allows itself to be automatically loaded.

to:

For ReClockOrNot to work correctly, you must disable the option within ReClock that allows itself to be automatically loaded.

Changed line 23 from:

ReClockOrNot will work automatically for .ts files and any other video file type played by NPVR (mkv, mp4, avi, etc). If you also wish to use ReClock for DVD playback, then you must change the audio renderer within the DVD Settings tab to "ReClock Audio Renderer".

to:

ReClockOrNot will work automatically for .ts files and any other video file type played by NPVR (mkv, mp4, avi, etc). If you also wish to use ReClock for DVD playback, then you must change the audio renderer within the DVD Settings tab to "ReClock Audio Renderer".

Changed lines 4-7 from:

NPVR uses transport stream files (.ts) for its Live TV (and Recordings). If more than one audio codec is selected in the Decoders Settings tab, perhaps because you have some TV channels with MPEG audio and others with AC3 audio, then ReClock will no longer function correctly. This is because it can only work with one audio decoder at a time, but NPVR must add all the enabled decoders to the playback graph because it doesn't know in advance which ones will actually be required.

ReClockOrNot is a small plugin that works around this situation by disabling ReClock whenever a .ts file is in use.

to:

NPVR uses transport stream files (.ts) for its Live TV and recordings. If more than one audio codec is selected in the Decoders Settings tab, perhaps because you have some TV channels with MPEG audio and others with AC3 audio, then ReClock will no longer function correctly. This is because it can only work with one audio decoder at a time, but NPVR must add all the enabled decoders to the playback graph because it doesn't know in advance which ones will actually be required.

ReClockOrNot is a small plugin that works around this situation by disabling ReClock whenever a .ts file is in use, but remain active for all other video files.

Changed lines 13-14 from:
to:

Download: ReClockOrNot.zip (5 KB, 788 downloads)

Added lines 23-24:

ReClockOrNot will work automatically for .ts files and any other video file type played by NPVR (mkv, mp4, avi, etc). If you also wish to use ReClock for DVD playback, then you must change the audio renderer within the DVD Settings tab to "ReClock Audio Renderer".

Changed lines 26-28 from:

This plugin is discussed in the Plugin & Skin support forum <Feel free to link to a specific thread or sub-forum in order to help the user.>

to:

If you require support for this plugin, then please post a message in the Plugin & Skin support forum.

Changed lines 43-44 from:

(:comment UNCOMMENT THE LINE BELOW IF THIS IS THE MAIN PAGE FOR A PLUGIN :) (:comment Category:[[!Plugin]] :)

to:

Category:Plugin

Added lines 1-43:

(:comment FILL IN THE SECTIONS MARKED WITH < > :) (:description Allows ReClock to work with NPVR, by disabling it during Live TV and Recordings where it would ordinarily be incompatible with the multiple audio codecs in use simultaneously. :)

NPVR uses transport stream files (.ts) for its Live TV (and Recordings). If more than one audio codec is selected in the Decoders Settings tab, perhaps because you have some TV channels with MPEG audio and others with AC3 audio, then ReClock will no longer function correctly. This is because it can only work with one audio decoder at a time, but NPVR must add all the enabled decoders to the playback graph because it doesn't know in advance which ones will actually be required.

ReClockOrNot is a small plugin that works around this situation by disabling ReClock whenever a .ts file is in use.

Downloading and Installing

The latest version of the ReClockOrNot plugin is v2.11.03.26, released on March 26th, 2011.

Extract the zip's contents into C:\Users\Public\NPVR (or equivalent).

Download:ReClockOrNot.zip

Requirements

This plugin requires at least NPVR v2.0.3. Obviously ReClock must be installed too.

Configuration

For ReClockOrNot to work correctly, you must disable the option within ReClock that allows itself to be automatically loaded.

Support

This plugin is discussed in the Plugin & Skin support forum <Feel free to link to a specific thread or sub-forum in order to help the user.>

Un-installation

To remove ReClockOrNot, simply delete the ReClockOrNot directory from within /Plugins.

Source Code

The source code for the System plugin is available on request by sending a PM to imilne.

Author(s)

Developed by imilne (:comment Developed by [[~imilne]]. :)

History

2011-03-26 : v2.11.03.26

  • Initial public release

(:comment UNCOMMENT THE LINE BELOW IF THIS IS THE MAIN PAGE FOR A PLUGIN :) (:comment Category:[[!Plugin]] :)

Page last modified on October 11, 2013, at 08:37 AM