Manual.NEWA History

Show minor edits - Show changes to output

August 30, 2015, at 07:39 PM by UncleJohnsBand -
Changed lines 32-34 from:
NextPVR 3.4.8 includes NEWA v2.16.

The latest development build is [[Download:NEWA.v2.16_20150421-1.zip | NEWA v2.16]]  (DownloadCount:NEWA.v2.16_20150421-1.zip downloads), which was released on 2015-04-25.  '''You must be using NPVR 3.4.8 or higher to use this build.'''
to:
NextPVR 3.5.7 includes NEWA v2.17.

The latest development build is [[Download:NEWA.v2.17_20150829-1.zip | NEWA v2.17]]  (DownloadCount:NEWA.v2.17_20150829-1.zip downloads), which was released on 2015-08-30.  '''You must be using NPVR 3.4.8 or higher to use this build.'''
April 25, 2015, at 03:06 PM by UncleJohnsBand -
Changed lines 32-34 from:
NextPVR 3.3.8 includes NEWA v2.15.

The latest development build is [[Download:NEWA.v2.15_20141020-1.zip | NEWA v2.15]]  (DownloadCount:NEWA.v2.15_20141020-1.zip downloads), which was released on 2014-10-24.  '''You must be using NPVR 3.3.8 or higher to use this build.'''
to:
NextPVR 3.4.8 includes NEWA v2.16.

The latest development build is [[Download:NEWA.v2.16_20150421-1.zip | NEWA v2.16]]  (DownloadCount:NEWA.v2.16_20150421-1.zip downloads), which was released on 2015-04-25.  '''You must be using NPVR 3.4.8 or higher to use this build.'''
October 26, 2014, at 09:09 PM by UncleJohnsBand -
Changed lines 32-34 from:
NextPVR 3.2.9 includes NEWA v2.12.

The latest development build is [[Download:NEWA.v2.13_20140721-1.zip | NEWA v2.13]]  (DownloadCount:NEWA.v2.13_20140721-1.zip downloads), which was released on 2014-07-21.  '''You must be using NPVR 3.2.9 or higher to use this build.'''
to:
NextPVR 3.3.8 includes NEWA v2.15.

The latest development build is [[Download:NEWA.v2.15_20141020-1.zip | NEWA v2.15]]  (DownloadCount:NEWA.v2.15_20141020-1.zip downloads), which was released on 2014-10-24.  '''You must be using NPVR 3.3.8 or higher to use this build.'''
July 21, 2014, at 09:06 PM by UncleJohnsBand -
Changed lines 32-34 from:
NextPVR 3.1.1 includes NEWA v2.01.

The latest development build is [[Download:NEWA.v2.11_20140112-1.zip | NEWA v2.11]]  (DownloadCount:NEWA.v2.11_20140112-1.zip downloads), which was released on 2014-01-12.  '''You must be using NPVR 3.1.1 or higher to use this build.'''
to:
NextPVR 3.2.9 includes NEWA v2.12.

The latest development build is [[Download:NEWA.v2.13_20140721-1.zip | NEWA v2.13]]  (DownloadCount:NEWA.v2.13_20140721-1.zip downloads), which was released on 2014-07-21.  '''You must be using NPVR 3.2.9 or higher to use this build.'''
January 13, 2014, at 03:35 AM by UncleJohnsBand -
Changed line 34 from:
The latest development build is [[Download:NEWA.v2.10_20131230-1.zip | NEWA v2.10]]  (DownloadCount:NEWA.v2.10_20131230-1.zip downloads), which was released on 2013-12-30.  '''You must be using NPVR 3.1.1 or higher to use this build.'''
to:
The latest development build is [[Download:NEWA.v2.11_20140112-1.zip | NEWA v2.11]]  (DownloadCount:NEWA.v2.11_20140112-1.zip downloads), which was released on 2014-01-12.  '''You must be using NPVR 3.1.1 or higher to use this build.'''
December 31, 2013, at 02:14 AM by UncleJohnsBand -
Changed lines 34-35 from:
The latest development build is [[Download:NEWA.v2.01_20131008-1.zip | NEWA v2.01]]  (DownloadCount:NEWA.v2.01_20131008-1.zip downloads), which was released on 2013-13-08.  '''You must be using NPVR 3.1.1 or higher to use this build.'''
to:
The latest development build is [[Download:NEWA.v2.10_20131230-1.zip | NEWA v2.10]]  (DownloadCount:NEWA.v2.10_20131230-1.zip downloads), which was released on 2013-12-30.  '''You must be using NPVR 3.1.1 or higher to use this build.'''
Added line 44:
**AjaxMin.dll
Added line 56:
**System.Net.Http.Extensions.dll
Added line 58:
**System.Net.Http.Primitives.dll
Added line 60:
**System.Web.Helpers.dll
October 17, 2013, at 01:47 AM by UncleJohnsBand - Updated for NEWA 2.00
Changed lines 32-37 from:
NextPVR 2.6.2 includes NEWA v1.34.

The latest development build is [[Download:NEWA.v1.34.zip | NEWA v1.34]] (DownloadCount:NEWA.v1.34.zip downloads), which was released on 2013-03-14.  '''You must be using NPVR 2.5.5 or higher to use this build.'''

'''NEWA 1.3.4 will is the last .Net 2.0 version of NEWA.  The next release will be utilizing .Net 4.0.'''
to:
NextPVR 3.1.1 includes NEWA v2.01.

The latest development build is [[Download:NEWA.v2.01_20131008-1.zip | NEWA v2.01]]  (DownloadCount:NEWA.v2.01_20131008-1.zip downloads), which was released on 2013-13-08.  '''You must be using NPVR 3.1.1 or higher to use this build.'''

[[Download:NEWA.v1.34.zip | NEWA v1.34]] (DownloadCount:NEWA.v1.34.zip downloads) '''was the last .Net 2.0 version of NEWA.  The current release utilizes .Net 4.0.'''
Changed lines 42-66 from:
* Delete only the taglib-sharp.dll, System.Web.Extensions.Design.dll, System.Web.Extensions.dll, eWorld.UI.dll, Rss.dll, Rss.pdb, Rss.Net.dll and svg.dll files from the web\bin directory
to:
* Delete only these files from the web\bin directory:
**AjaxControlToolkit.dll
**eWorld.UI.dll
**HtmlAgilityPack.dll
**ICSharpCode.SharpZipLib.dll
**Microsoft.Web.Infrastructure.dll
**NewtonsoftJson.dll
**Rss.dll
**Rss.Net.dll
**Rss.pdb
**svg.dll
**svg.pdb
**System.Net.Http.dll
**System.Net.Http.Formatting.dll
**System.Net.WebRequest.dll
**System.Web.Http.dll
**System.Web.Http.WebHost.dll
**System.Web.Mvc.dll
**System.Web.Razor.dll
**System.Web.Routing.dll
**System.Web.WebPages.Deployment.dll
**System.Web.WebPages.dll
**System.Web.WebPages.Razor.dll
**taglib-sharp.dll

March 29, 2013, at 02:55 AM by UncleJohnsBand -
Changed lines 32-34 from:
NextPVR 2.5.9 includes a modified non-mobile supporting NEWA v1.27.

The latest development build is
[[Download:NEWA.v1.31.zip | NEWA v1.31]] (DownloadCount:NEWA.v1.31.zip downloads), which was released on 2013-01-11.  '''You must be using NPVR 2.5.5 or higher to use this build.'''
to:
NextPVR 2.6.2 includes NEWA v1.34.

The latest development build is
[[Download:NEWA.v1.34.zip | NEWA v1.34]] (DownloadCount:NEWA.v1.34.zip downloads), which was released on 2013-03-14.  '''You must be using NPVR 2.5.5 or higher to use this build.'''

'''NEWA 1.3.4 will is the last .Net 2.0 version of NEWA.  The next release will be utilizing .Net 4.0
.'''
January 12, 2013, at 04:53 AM by UncleJohnsBand -
Changed line 34 from:
The latest development build is [[Download:NEWA.v1.30.zip | NEWA v1.30]] (DownloadCount:NEWA.v1.30.zip downloads), which was released on 2012-11-27.  '''You must be using NPVR 2.5.5 or higher to use this build.'''
to:
The latest development build is [[Download:NEWA.v1.31.zip | NEWA v1.31]] (DownloadCount:NEWA.v1.31.zip downloads), which was released on 2013-01-11.  '''You must be using NPVR 2.5.5 or higher to use this build.'''
November 28, 2012, at 04:01 AM by UncleJohnsBand -
Changed line 34 from:
The latest development build is [[Download:NEWA.v1.29.zip | NEWA v1.29]] (DownloadCount:NEWA.v1.29.zip downloads), which was released on 2012-10-28.  '''You must be using NPVR 2.5.5 or higher to use this build.'''
to:
The latest development build is [[Download:NEWA.v1.30.zip | NEWA v1.30]] (DownloadCount:NEWA.v1.30.zip downloads), which was released on 2012-11-27.  '''You must be using NPVR 2.5.5 or higher to use this build.'''
October 28, 2012, at 11:59 PM by UncleJohnsBand -
Changed line 34 from:
The latest development build is [[Download:NEWA.v1.28.zip | NEWA v1.28]] (DownloadCount:NEWA.v1.28.zip downloads), which was released on 2012-10-28.  '''You must be using NPVR 2.5.5 or higher to use this build.'''
to:
The latest development build is [[Download:NEWA.v1.29.zip | NEWA v1.29]] (DownloadCount:NEWA.v1.29.zip downloads), which was released on 2012-10-28.  '''You must be using NPVR 2.5.5 or higher to use this build.'''
October 28, 2012, at 03:29 PM by UncleJohnsBand -
Changed lines 32-34 from:
NextPVR 2.5.5 includes a modified non-mobile supporting NEWA v1.26.

The latest development build is [[Download:NEWA.v1.26.zip | NEWA v1.26]] (DownloadCount:NEWA.v1.26.zip downloads), which was released on 2012-08-24.  '''You must be using NPVR 2.5.5 or higher to use this build.'''
to:
NextPVR 2.5.9 includes a modified non-mobile supporting NEWA v1.27.

The latest development build is [[Download:NEWA.v1.28.zip | NEWA v1.28]] (DownloadCount:NEWA.v1.28.zip downloads), which was released on 2012-10-28.  '''You must be using NPVR 2.5.5 or higher to use this build.'''
August 25, 2012, at 02:03 AM by UncleJohnsBand -
Changed lines 32-34 from:
NextPVR 2.4.3 includes [[Download:NEWA.v1.24.zip|NEWA v1.24]].

The latest development build is [[Download:NEWA.v1.25.zip | NEWA v1.25]] (DownloadCount:NEWA.v1.25.zip downloads), which was released on 2012-04-10.  '''You must be using NPVR 2.3.6 or higher to use this build.'''
to:
NextPVR 2.5.5 includes a modified non-mobile supporting NEWA v1.26.

The latest development build is [[Download:NEWA.v1.26.zip | NEWA v1.26]] (DownloadCount:NEWA.v1.26.zip downloads), which was released on 2012-08-24.  '''You must be using NPVR 2.5.5 or higher to use this build.'''
April 11, 2012, at 01:32 AM by UncleJohnsBand -
Changed lines 32-34 from:
NextPVR 2.3.6 includes [[Download:NEWA.v1.23.zip|NEWA v1.23]].

The latest development build is [[Download:NEWA.v1.23.zip | NEWA v1.23]] (DownloadCount:NEWA.v1.23.zip downloads), which was released on 2012-01-16.  '''You must be using NPVR 2.3.6 or higher to use this build.'''
to:
NextPVR 2.4.3 includes [[Download:NEWA.v1.24.zip|NEWA v1.24]].

The latest development build is [[Download:NEWA.v1.25.zip | NEWA v1.25]] (DownloadCount:NEWA.v1.25.zip downloads), which was released on 2012-04-10.  '''You must be using NPVR 2.3.6 or higher to use this build.'''
Changed line 93 from:
'''NOTE:''' ''64-bit systems will need to update the location pointers for VLC by clicking on the config button near the top right corner of the EWA screen.  Once in the config screen, scroll down until you see the two VLC Location fields.  One for audio and one for video.  By default, these fields will be filled as '''C:\Program Files\VideoLAN\VLC''' .  As of this writing (23-JAN-2011), VLC is only available as a 32-bit app, which 64-bit Windows will install at '''C:\Program Files (x86)\VideoLAN\VLC'''.  You must change both fields in the config screen to this location (or, if you did not accept the default install location when you installed VLC, then change both fields to reflect the location where VLC is now located.) ''
to:
'''NOTE:''' ''64-bit systems will need to update the location pointers for VLC by clicking on the config button near the top right corner of the EWA screen.  Once in the config screen, scroll down until you see the two VLC Location fields.  One for audio and one for video.  By default, these fields will be filled as '''C:\Program Files\VideoLAN\VLC''' .  As of this writing (23-JAN-2011), VLC is only available as a 32-bit app, which 64-bit Windows will install at '''C:\Program Files (x86)\VideoLAN\VLC'''.  You must change both fields in the config screen to this location (or, if you did not accept the default install location when you installed VLC, then change both fields to reflect the location where VLC is now located.) After making your changes, click on the '''Submit''' button near the top left corner of the screen to save the changes. ''
Changed lines 93-94 from:
'''NOTE:''' ''64-bit systems will need to update the location pointers for VLC by clicking on the config button near the top right corner of the EWA screen.  Once in the config screen, scroll down until you see the two VLC Location fields.  One for audio and one for video.  By default, these fields will be filled as
'''C:\Program Files\VideoLAN\VLC''' .  As of this writing (23-JAN-2011), VLC is only available as a 32-bit app, which 64-bit Windows will install at '''C:\Program Files (x86)\VideoLAN\VLC'''.  You must change both fields in the config screen to this location (or, if you did not accept the default install location when you installed VLC, then change both fields to reflect the location where VLC is now located.) ''
to:
'''NOTE:''' ''64-bit systems will need to update the location pointers for VLC by clicking on the config button near the top right corner of the EWA screen.  Once in the config screen, scroll down until you see the two VLC Location fields.  One for audio and one for video.  By default, these fields will be filled as '''C:\Program Files\VideoLAN\VLC''' .  As of this writing (23-JAN-2011), VLC is only available as a 32-bit app, which 64-bit Windows will install at '''C:\Program Files (x86)\VideoLAN\VLC'''.  You must change both fields in the config screen to this location (or, if you did not accept the default install location when you installed VLC, then change both fields to reflect the location where VLC is now located.) ''
January 20, 2012, at 03:35 AM by UncleJohnsBand -
Changed line 34 from:
The latest development build is [[Download:NEWA.v1.23.zip | NEWA v1.23]] (DownloadCount:NEWA.v1.23.zip downloads), which was released on 2012-01-16.
to:
The latest development build is [[Download:NEWA.v1.23.zip | NEWA v1.23]] (DownloadCount:NEWA.v1.23.zip downloads), which was released on 2012-01-16.  '''You must be using NPVR 2.3.6 or higher to use this build.'''
January 18, 2012, at 03:31 AM by UncleJohnsBand -
Changed lines 32-34 from:
NextPVR 2.2.6 includes [[Download:NEWA.v1.18.zip|NEWA v1.18]].

The latest development build is [[Download:NEWA.v1.21.zip | NEWA v1.21]] (DownloadCount:NEWA.v1.21.zip downloads), which was released on 2011-10-27.
to:
NextPVR 2.3.6 includes [[Download:NEWA.v1.23.zip|NEWA v1.23]].

The latest development build is [[Download:NEWA.v1.23.zip | NEWA v1.23]] (DownloadCount:NEWA.v1.23.zip downloads), which was released on 2012-01-16.
Changed line 78 from:
http://youraddress:yourport/public/rss.aspx?filter=completed&encl_dir=TV&encl_port=7650
to:
**http://youraddress:yourport/public/rss.aspx?filter=completed&encl_dir=TV&encl_port=7650
Changed line 52 from:
!! NAS Drive Access
to:
!!! NAS Drive Access
Changed lines 63-81 from:
Real-Time RSS access information:
*Feed Reader Discovery: URL: http://youraddress:yourport/public/rss.aspx

Direct RSS Feed access information:
*URL: http://youraddress:yourport/public/rss.aspx?filter=
**Filter Options:
***
completed
*** in-progress
*** pending
*** conflict
*** failed
*** deleted

'''Enclosures''' are supported in the RSS feed.  To use enclosures your recordings must be accessible via HTTP on the file system.  NEWA's transfer mechanism does not natively support the necessary HTTP file access.  Rather than reinvent the wheel enclosures can be supported by the open source HTTP File Server software [[http://www.rejetto.com/hfs/?f=intro|HFS]].  This software will host up a file system via HTTP.  It is a standalone application that is very small in size.

**Simply install [[http://www.rejetto.com/hfs/?f=intro|HFS]] and set the port you want your enclosures to be accessed over.
**Point [[http://www.rejetto.com/hfs/?f=intro|HFS]] to your file store for your recordings and set the desired name of the folder.
**To include enclosures in your RSS feed you need to pass in two new query parameters.  The port and the directory name you set in [[http://www.rejetto.com/hfs/?f=intro|HFS]].
****The URL should look something like:
to:
!!! Real-Time RSS access information:
Feed Reader Discovery: URL: http://youraddress:yourport/public/rss.aspx

!!! Direct RSS Feed access information:
Base URL: http://youraddress:yourport/public/rss.aspx?filter=

The filter options are 'completed', 'in-progress', 'pending', 'conflict', 'failed' or 'deleted'.

!!!
Enclosures
Enclosures
are supported in the RSS feed.  To use enclosures your recordings must be accessible via HTTP on the file system.  NEWA's transfer mechanism does not natively support the necessary HTTP file access.  Rather than reinvent the wheel enclosures can be supported by the open source HTTP File Server software [[http://www.rejetto.com/hfs/?f=intro|HFS]]. This software will host a file system via HTTP. It is a standalone application that is very small in size.

!!!! Configuration
*First, install [[http://www.rejetto.com/hfs/?f=intro|HFS]] and set the port you want your enclosures to be accessed over.
*Point [[http://www.rejetto.com/hfs/?f=intro|HFS]] to your file store for your recordings and set the desired name of the folder.
*To include enclosures in your RSS feed you need to pass in two new query parameters.  The port and the directory name you set in [[http://www.rejetto.com/hfs/?f=intro|HFS]]. The URL should look something like:
Changed lines 79-80 from:

*
*If you want enclosures to be accessible outside your network you will need to open the port you set in [[http://www.rejetto.com/hfs/?f=intro|HFS]] and forward it to you hosting machine.
to:
*If you want enclosures to be accessible outside your network you will need to open the port you set in [[http://www.rejetto.com/hfs/?f=intro|HFS]] and forward it to you hosting machine.
Changed lines 32-33 from:
NextPVR 2.2.6 includes [[Download:NEWA.v1.18.zip| NEWA v1.18]].
to:
NextPVR 2.2.6 includes [[Download:NEWA.v1.18.zip|NEWA v1.18]].
Changed lines 46-47 from:
* On some PC's the NextPVR Recording Service service may need to have the "Allow service to interact with desktop" box checked for NEWA to work correctly. This setting is available Start\Control Panel\System and Security\Administrative Tools\Services.
to:

!!! Allow service to interact with desktop
On some PC's the NextPVR Recording Service service may need to have the "Allow service to interact with desktop" box checked for NEWA to work correctly. This setting is available Start\Control Panel\System and Security\Administrative Tools\Services.
Changed line 52 from:
!! NAS Drive Setup
to:
!! NAS Drive Access
Changed lines 92-94 from:
If set, the Auto-Search/Record feature will only run one time per day.  It will only run when at least 1 hour has elapsed since your scheduled EPG update time for that day.  This helps ensure that your searches are executed against the most recent EPG load and only run one time each day.  You can force your saved searches to run in NEWA via the Search Now button on the Config tab.

to:
If set, the Auto-Search/Record feature will only run one time per day. It will only run when at least 1 hour has elapsed since your scheduled EPG update time for that day.  This helps ensure that your searches are executed against the most recent EPG load and only run one time each day.  You can force your saved searches to run in NEWA via the Search Now button on the Config tab.

Changed lines 96-97 from:
You must first install [[http://www.videolan.org/vlc/| VLC]].  VLC is used on the NPVR Host PC to stream the recording.  Just run the install...if you use the default install settings you do not need to change anything in the web configuration tab of EWA. '''Note:''' x64 systems will need to update the location of VLC on the config tab.
to:
You must first install [[http://www.videolan.org/vlc/| VLC]].  VLC is used on the NextPVR Host PC to stream the recording. Just run the install...if you use the default install settings you do not need to change anything in the web configuration tab of EWA. '''Note:''' 64-bit systems will need to update the location of VLC on the config tab.
Changed line 115 from:
Using the external player option is far more reliable than the plugins.  If you do use a plugin running FireFox is the best browser to use with either Windows Media or VLC plugin.  I prefer the VLC plugin.
to:
Using the external player option is far more reliable than the plugins.  If you do use a plugin running FireFox is the best browser to use with either Windows Media or VLC plugin. The VLC plugin is recommended.
Changed lines 29-31 from:
!! Current Status
NEWA is included in the default NextPVR installation. Updates and fixes are made to NEWA between NextPVR releases, these are available below.
to:
!! Current Version
NEWA is included in the default NextPVR installation. Updates and fixes are made to NEWA between NextPVR releases, these are made available as development builds.
Changed lines 36-38 from:
!! Installation
* If you have not yet configured NextPVR to run NEWA you will need to follow and complete the instructions in the Configuration section (
above this section).
* Download a copy from a link above in the Status area
to:
!! Installing a development build
* Download the NEWA build you want to use from the links
above.
Changed line 39 from:
* Delete all contents and directories in the \web folder ('''except''' for the bin directory...removing this will cause NPVR to reinstall the default version of NEWA)
to:
* Delete all contents and directories in the \web folder ('''except''' for the bin directory...removing this will cause NextPVR to reinstall the default version of NEWA)
Changed lines 41-46 from:
* Extract the zip into your NPVR data folder using the option to use directory names.  This will load all the files into your \web directory and subdirectories.
* Restart the NPVR Recording Service
* Hit Refresh in your Web Browser (important to reload cached files that might have changed)

*
'''On some PC's the NPVR Recording Service service may need to have the "Allow service to interact with desktop" box checked for NEWA to work correctly.'''
to:
* Extract the zip into your [[QuickStart.InstalledParts#datadirectory|NextPVR data directory]] using the option to use directory names.  This will load all the files into your \web directory and subdirectories.
* Restart the NPVR Recording Service.
* Refresh the NEWA page in your Web Browser (important to reload cached files that might have changed).

!! Troubleshooting
* On some PC
's the NextPVR Recording Service service may need to have the "Allow service to interact with desktop" box checked for NEWA to work correctly. This setting is available Start\Control Panel\System and Security\Administrative Tools\Services.

Attach:NEWAServiceSettings.png
Changed lines 1-2 from:
|| border=0 width=80%
||NEWA is the
web based interface into NPVR and is supported by [[~UncleJohnsBand]].||
to:
NEWA is a rich web based interface into NextPVR. It is supported by [[~UncleJohnsBand]].
Changed lines 4-60 from:
|| align=right
NPVR's rich web interface (NEWA) allows you to:
 
*View your TV Guide
*Schedule Events
*Delete Events
*Search for Events
*Stream (via VLC) or download recorded Events and Live TV
*Stream (via VLC) or download Music from your Music Library
*Stream (via VLC) or download Videos from your Video Library
*View your Photo Library in a web based photo gallery format
*Interoperability to other applications and systems via a full Web Service interface
*RSS Feed for recorded Events
*Auto search and record Events
*Configure front-end display options and settings

Just point your web browser to http://machine_name_or_ip_address:8866, and enjoy (or http://localhost:8866 if you're on the same box). You can set an admin password for the configuration functions on the 'MVP & Web' tab in Settings.

![[#toc]]Table of Contents [--(TOC)--]:

* [[#status|Current Status]]
* [[#usage|Usage]]
* [[#config|Configuration]]
* [[#install|Install Instructions]]
* [[#nas|NAS Drive Setup]]
* [[#rss|RSS Capabilities]]
* [[#auto-search|Auto-Search/Record]]
* [[#stream|Web Streaming Capabilities]]
* [[NEWA.Change Log|Change Log]]


!![[#status]]Status [-----[[#toc|Return to TOC]]-----]

The latest build bundled with NPVR 2.2.6 is based on [[Download:NEWA.v1.18.zip| build 1.18]].

The latest development build is [[Download:NEWA.v1.21.zip | build 1.21]] (DownloadCount:NEWA.v1.21.zip downloads) - uploaded on 2011-10-27.



!![[#usage]]Usage [-----[[#toc|Return to TOC]]-----]
Here's a [[http://localhost:8866/guide2.aspx|quick link]] to access your guide based on default settings.  The raw URL on your local machine (machine hosting NPVR) is http://localhost:8866/guide2.aspx for CSS based screens and http://localhost:8866/guide.aspx for HTML table based screens.

!![[#config]]Configuration [-----[[#toc|Return to TOC]]-----]



Using the Settings option in NPVR select the MVP & Web tab:
* Enable Web server
* Set the username
* Set the password required to access the web-interface
* Set the port that NEWA will be made available on '''(do not use port 8080 as it will conflict with [[#stream|Web Streaming Capabilities]])'''. 



!![[#install]]Installation [-----[[#toc|Return to TOC]]-----]

* If you have not yet configured NPVR to run NEWA you will need to follow and complete the instructions in the Configuration section (above this section).
to:
!! Features
*View your TV Guide.
*Schedule Events.
*Delete Events.
*Search for Events.
*Stream (via VLC) or download recorded Events and Live TV.
*Stream (via VLC) or download Music from your Music Library.
*Stream (via VLC) or download Videos from your Video Library.
*View your Photo Library in a web based photo gallery format.
*Interoperability to other applications and systems via a full Web Service interface.
*RSS Feed for recorded Events.
*Auto search and record Events.
*Configure web front-end display options and settings.

(:toc:)

!! Quick Start
Just point your web browser to http://machine_name_or_ip_address:8866, and enjoy (or http://localhost:8866 if you're on the same box).

Here's a [[http://localhost:8866/guide2.aspx|quick link]] to access your guide based on default settings.  The raw URL on your local machine (machine hosting NextPVR) is http://localhost:8866/guide2.aspx for CSS based screens and http://localhost:8866/guide.aspx for HTML table based screens.


!! Configuration
The websever part of NEWA is configured using the [[Configuration.ClientAndWeb|NMT & Web tab]] of the [[Configuration.Configuration|settings dialog]].

!! Current Status
NEWA is included in the default NextPVR installation. Updates and fixes are made to NEWA between NextPVR releases, these are available below.

NextPVR 2.2.6 includes [[Download:NEWA.v1.18.zip| NEWA v1.18]].

The latest development build is [[Download:NEWA.v1.21.zip | NEWA v1.21]] (DownloadCount:NEWA.v1.21.zip downloads), which was released on 2011-10-27.

!! Installation
* If you have not yet configured NextPVR to run NEWA you will need to follow and complete the instructions in the Configuration section (above this section).
Changed line 39 from:
* Stop the NPVR Recording Service
to:
* Stop the NextPVR Recording Service
Changed lines 49-50 from:

!![[#nas]]NAS Drive Setup [-----[[#toc|Return to TOC]]-----]
to:
!! NAS Drive Setup
Changed lines 57-59 from:

!![[#rss]]RSS Capabilities [-----[[#toc|Return to TOC]]-----]
to:
!! RSS Capabilities
Changed lines 84-86 from:

!![[#auto-search]]Auto-Search/Record [-----[[#toc|Return to TOC]]-----]
to:
!! Auto-Search/Record
Changed lines 92-94 from:

!![[#stream]]Web Streaming Capabilities [-----[[#toc|Return to TOC]]-----]
to:
!! Web Streaming Capabilities
Changed lines 141-144 from:
*If your upstream bandwidth of your internet connection is 384k do not go above the 256k bitrate setting for streams going outside of your network.
to:
*If your upstream bandwidth of your internet connection is 384k do not go above the 256k bitrate setting for streams going outside of your network.

!! Change Log
[[NEWA.Change Log|NEWA Change Log]]
.
October 27, 2011, at 09:28 PM by UncleJohnsBand -
Changed line 40 from:
The latest development build is [[Download:NEWA.v1.20.zip | build 1.20]] (DownloadCount:NEWA.v1.20.zip downloads) - uploaded on 2011-20-14.
to:
The latest development build is [[Download:NEWA.v1.21.zip | build 1.21]] (DownloadCount:NEWA.v1.21.zip downloads) - uploaded on 2011-10-27.
October 15, 2011, at 03:15 AM by UncleJohnsBand -
Changed line 40 from:
The latest development build is [[Download:NEWA.v1.19.zip | build 1.19]] (DownloadCount:NEWA.v1.19.zip downloads) - uploaded on 2011-09-30.
to:
The latest development build is [[Download:NEWA.v1.20.zip | build 1.20]] (DownloadCount:NEWA.v1.20.zip downloads) - uploaded on 2011-20-14.
September 30, 2011, at 03:29 AM by UncleJohnsBand -
Changed line 40 from:
The latest development build is [[Download:NEWA.v1.18.zip | build 1.18]] (DownloadCount:NEWA.v1.18.zip downloads) - uploaded on 2011-08-25.
to:
The latest development build is [[Download:NEWA.v1.19.zip | build 1.19]] (DownloadCount:NEWA.v1.19.zip downloads) - uploaded on 2011-09-30.
August 27, 2011, at 11:01 PM by UncleJohnsBand -
Changed lines 38-40 from:
The latest build bundled with NPVR 2.1.4 is based on [[Download:NEWA.v1.17.zip| build 1.17]].

The latest development build is [[Download:NEWA.v1.17.zip | build 1.17]] (DownloadCount:NEWA.v1.17.zip downloads) - uploaded on 2011-05-30.
to:
The latest build bundled with NPVR 2.2.6 is based on [[Download:NEWA.v1.18.zip| build 1.18]].

The latest development build is [[Download:NEWA.v1.18.zip | build 1.18]] (DownloadCount:NEWA.v1.18.zip downloads) - uploaded on 2011-08-25.
July 02, 2011, at 08:46 PM by UncleJohnsBand -
Changed lines 38-40 from:
The latest build bundled with NPVR 2.0.3 is based on [[Download:NEWA.v1.14.zip| build 1.14]].

The latest development build is [[Download:NEWA.v1.16.zip | build 1.16]] (DownloadCount:NEWA.v1.16.zip downloads) - uploaded on 2011-05-20.
to:
The latest build bundled with NPVR 2.1.4 is based on [[Download:NEWA.v1.17.zip| build 1.17]].

The latest development build is [[Download:NEWA.v1.17.zip | build 1.17]] (DownloadCount:NEWA.v1.17.zip downloads) - uploaded on 2011-05-30.
May 21, 2011, at 01:12 AM by UncleJohnsBand -
Changed lines 40-43 from:
The latest development build is [[Download:NEWA.v1.15.zip | build 1.15]] (DownloadCount:NEWA.v1.15.zip downloads).


to:
The latest development build is [[Download:NEWA.v1.16.zip | build 1.16]] (DownloadCount:NEWA.v1.16.zip downloads) - uploaded on 2011-05-20.


Changed line 65 from:
* Delete only the taglib-sharp.dll, System.Web.Extensions.Design.dll, System.Web.Extensions.dll, eWorld.UI.dll, Rss.dll, Rss.pdb and Rss.Net.dll files from the web\bin directory
to:
* Delete only the taglib-sharp.dll, System.Web.Extensions.Design.dll, System.Web.Extensions.dll, eWorld.UI.dll, Rss.dll, Rss.pdb, Rss.Net.dll and svg.dll files from the web\bin directory
Changed line 161 from:
     Firefrox 1.5
to:
     Firefox 1.5
April 11, 2011, at 02:02 AM by UncleJohnsBand -
Changed line 39 from:
The latest development build is [[Download:NEWA.v1.15.zip | build 1.15]].
to:
The latest development build is [[Download:NEWA.v1.15.zip | build 1.15]] (DownloadCount:NEWA.v1.15.zip downloads).
April 10, 2011, at 04:52 AM by UncleJohnsBand -
Changed line 39 from:
The latest development build is [[Download:NEWA.v1.15.zip| build 1.15]].
to:
The latest development build is [[Download:NEWA.v1.15.zip | build 1.15]].
April 10, 2011, at 04:32 AM by UncleJohnsBand -
Changed line 32 from:
* [[Manual.NEWA.Change Log|Change Log]]
to:
* [[NEWA.Change Log|Change Log]]
April 10, 2011, at 04:31 AM by UncleJohnsBand -
Changed line 32 from:
* [[NEWA.Change Log|Change Log]]
to:
* [[Manual.NEWA.Change Log|Change Log]]
April 10, 2011, at 04:31 AM by UncleJohnsBand -
Changed line 32 from:
* [[Change Log|Change Log]]
to:
* [[NEWA.Change Log|Change Log]]
April 10, 2011, at 04:30 AM by UncleJohnsBand -
Added line 32:
* [[Change Log|Change Log]]
April 10, 2011, at 04:24 AM by UncleJohnsBand -
Added lines 37-38:

The latest development build is [[Download:NEWA.v1.15.zip| build 1.15]].
April 06, 2011, at 11:58 PM by UncleJohnsBand -
Changed line 120 from:
You must first install [[http://www.videolan.org/vlc/| VLC]].  VLC is used on the NPVR Host PC to stream the recording.  Just run the install...if you use the default install settings you do not need to change anything in the web configuration tab of EWA.
to:
You must first install [[http://www.videolan.org/vlc/| VLC]].  VLC is used on the NPVR Host PC to stream the recording.  Just run the install...if you use the default install settings you do not need to change anything in the web configuration tab of EWA. '''Note:''' x64 systems will need to update the location of VLC on the config tab.
April 02, 2011, at 05:13 PM by UncleJohnsBand -
Added line 33:
Changed line 36 from:
The latest build bundled with NPVR 1.5.36 is based on build 1.13.
to:
The latest build bundled with NPVR 2.0.3 is based on [[Download:NEWA.v1.14.zip| build 1.14]].
February 04, 2011, at 03:20 AM by UncleJohnsBand -
Added line 38:
Added line 45:
Added line 53:
Added line 68:
Added line 77:
Added line 106:
Added line 114:
February 04, 2011, at 03:11 AM by UncleJohnsBand -
Changed line 48 from:
* Set the port that NEWA will be made available on '''(do not use port 8080 as it will conflict with [[http://gbpvr.com/nwiki/pmwiki/pmwiki.php?n=Manual.NEWA#stream|Web Streaming Capabilities]])'''. 
to:
* Set the port that NEWA will be made available on '''(do not use port 8080 as it will conflict with [[#stream|Web Streaming Capabilities]])'''. 
February 04, 2011, at 03:10 AM by UncleJohnsBand -
Added line 23:
Added line 28:
* [[#nas|NAS Drive Setup]]
Changed lines 31-32 from:
to:
* [[#stream|Web Streaming Capabilities]]
Added lines 65-72:
!![[#nas]]NAS Drive Setup [-----[[#toc|Return to TOC]]-----]
If you are experiencing problems with getting to NAS shares from NEWA you can use the following setup instructions and utility to allow NEWA to access the drive shares.

You need to use the [[http://forums.gbpvr.com/showthread.php?t=43067|ShareHelper]] utility program for this to work.

Instructions for the install and setup are in the thread as well as some troubleshooting items.  Any issues just post into the thread.

Changed lines 107-160 from:
If set, the Auto-Search/Record feature will only run one time per day.  It will only run when at least 1 hour has elapsed since your scheduled EPG update time for that day.  This helps ensure that your searches are executed against the most recent EPG load and only run one time each day.  You can force your saved searches to run in NEWA via the Search Now button on the Config tab.
to:
If set, the Auto-Search/Record feature will only run one time per day.  It will only run when at least 1 hour has elapsed since your scheduled EPG update time for that day.  This helps ensure that your searches are executed against the most recent EPG load and only run one time each day.  You can force your saved searches to run in NEWA via the Search Now button on the Config tab.


!![[#stream]]Web Streaming Capabilities [-----[[#toc|Return to TOC]]-----]

You must first install [[http://www.videolan.org/vlc/| VLC]].  VLC is used on the NPVR Host PC to stream the recording.  Just run the install...if you use the default install settings you do not need to change anything in the web configuration tab of EWA.

You can set the process priority, install location for VLC, bitrate, video size, buffer size, video/audio/mux combination for streaming, stream player (VLC or Windows Media) and view the video in the player via external player or web browser plugin.

'''For best streaming results use VLC 1.x or higher '''

'''Default Settings'''
*VLC Player to open externally
*Stream Bitrate = 256
*320x213 Video Size
*[=VLC Install Location set to c:\program files\videolan\vlc\=]
*Stream Port = 7648 '''(If you change this port do not use 8080...this is used by VLC)'''
*Stream Buffer = 5000 (5 seconds)
*Below Normal Process Priority (on a strong machine you can bump it up but I have found no problems on this setting in combination with the other default settings)
*Video/Audio/Mux combination = MP4 Video, MP4 Audio and Mpeg-TS Mux


'''Plugin Info:'''

Using the external player option is far more reliable than the plugins.  If you do use a plugin running FireFox is the best browser to use with either Windows Media or VLC plugin.  I prefer the VLC plugin.

  '''VLC Plugin'''
    Firefox 2.x
    Plugin works for Play, Stop and Pause

    IE 6.0
    Plugin works for Play, Stop and Pause

    IE 7.0
    Plugin works for Play, Stop and Pause

  '''Windows Media Plugin'''
    *'''Can only use the  WMV and MPEG 3 Audio with ASF Mux combination'''
    *For the Windows Media Plugin to work in Firefox you can not have the VLC plugin installed
    *Firefox Windows Media Plugin is available [[http://forums.mozillazine.org/viewtopic.php?t=206213 | here.]]
    *Instructions: for loading the plugin can be found [[http://forums.mozillazine.org/viewtopic.php?t=206213 | here.]]

    Firefrox 1.5
    Plugin Works. ('''Can not''' have the VLC Plugin Installed at the same time)

    IE 6.0
    Plugin Works.  However, Player window does not close correctly.

    IE 7.0
    Plugin Works.  However, Player window does not close correctly.

'''Known Limits'''
*FF and RW are currently not available.
*If your upstream bandwidth of your internet connection is 384k do not go above the 256k bitrate setting for streams going outside of your network.
February 04, 2011, at 02:58 AM by UncleJohnsBand -
Changed lines 27-29 from:
to:
* [[#rss|RSS Capabilities]]
* [[#auto-search|Auto-Search/Record]]

Added line 34:
Added line 40:
Added line 47:
Changed lines 59-96 from:
* '''On some PC's the NPVR Recording Service service may need to have the "Allow service to interact with desktop" box checked for NEWA to work correctly.'''
to:
* '''On some PC's the NPVR Recording Service service may need to have the "Allow service to interact with desktop" box checked for NEWA to work correctly.'''


!![[#rss]]RSS Capabilities [-----[[#toc|Return to TOC]]-----]

All RSS Feed readers such as [[http://www.feedreader.com/features.php|FeedReader]] and the built in readers in IE and FireFox should have no problems with these feeds.

Real-Time RSS access information:
*Feed Reader Discovery: URL: http://youraddress:yourport/public/rss.aspx

Direct RSS Feed access information:
*URL: http://youraddress:yourport/public/rss.aspx?filter=
**Filter Options:
*** completed
*** in-progress
*** pending
*** conflict
*** failed
*** deleted

'''Enclosures''' are supported in the RSS feed.  To use enclosures your recordings must be accessible via HTTP on the file system.  NEWA's transfer mechanism does not natively support the necessary HTTP file access.  Rather than reinvent the wheel enclosures can be supported by the open source HTTP File Server software [[http://www.rejetto.com/hfs/?f=intro|HFS]].  This software will host up a file system via HTTP.  It is a standalone application that is very small in size.

**Simply install [[http://www.rejetto.com/hfs/?f=intro|HFS]] and set the port you want your enclosures to be accessed over.
**Point [[http://www.rejetto.com/hfs/?f=intro|HFS]] to your file store for your recordings and set the desired name of the folder.
**To include enclosures in your RSS feed you need to pass in two new query parameters.  The port and the directory name you set in [[http://www.rejetto.com/hfs/?f=intro|HFS]].
****The URL should look something like:
http://youraddress:yourport/public/rss.aspx?filter=completed&encl_dir=TV&encl_port=7650

**If you want enclosures to be accessible outside your network you will need to open the port you set in [[http://www.rejetto.com/hfs/?f=intro|HFS]] and forward it to you hosting machine.


!![[#auto-search]]Auto-Search/Record [-----[[#toc|Return to TOC]]-----]

NEWA provides the ability to save searches that you may frequently use allowing you to easily search your EPG with the stored search criteria.  These saved searches can be set to record Events that are found in the search to be recorded.  You can optionally set/unsett these saved searches to be eligible for the Auto-Search feature of NEWA.

You can configure NEWA to run these saved searches automatically by setting the Enable Auto-Search and/or the Enable Auto-Record (sets found Events to be recorded) options on the Config tab of NEWA.  You contol how many days in the EPG are searched by entering a value (that represents the numbers of days to search) in the Auto-Search EPG Days field. 

If set, the Auto-Search/Record feature will only run one time per day.  It will only run when at least 1 hour has elapsed since your scheduled EPG update time for that day.  This helps ensure that your searches are executed against the most recent EPG load and only run one time each day.  You can force your saved searches to run in NEWA via the Search Now button on the Config tab.
February 04, 2011, at 02:43 AM by UncleJohnsBand -
Added line 23:
* [[#status|Current Status]]
Deleted line 24:
* [[#status|Current Status]]
Deleted lines 27-29:
!![[#usage]]Usage [-----[[#toc|Return to TOC]]-----]
Here's a [[http://localhost:8866/guide2.aspx|quick link]] to access your guide based on default settings.  The raw URL on your local machine (machine hosting NPVR) is http://localhost:8866/guide2.aspx for CSS based screens and http://localhost:8866/guide.aspx for HTML table based screens.

Added lines 31-33:

!![[#usage]]Usage [-----[[#toc|Return to TOC]]-----]
Here's a [[http://localhost:8866/guide2.aspx|quick link]] to access your guide based on default settings.  The raw URL on your local machine (machine hosting NPVR) is http://localhost:8866/guide2.aspx for CSS based screens and http://localhost:8866/guide.aspx for HTML table based screens.
February 04, 2011, at 02:40 AM by UncleJohnsBand -
Added line 23:
* [[#usage|Usage]]
Added lines 28-29:
!![[#usage]]Usage [-----[[#toc|Return to TOC]]-----]
Here's a [[http://localhost:8866/guide2.aspx|quick link]] to access your guide based on default settings.  The raw URL on your local machine (machine hosting NPVR) is http://localhost:8866/guide2.aspx for CSS based screens and http://localhost:8866/guide.aspx for HTML table based screens.
February 04, 2011, at 02:30 AM by UncleJohnsBand -
Changed lines 28-29 from:
!![[#status]]Status [-----[[http://gbpvr.com/nwiki/pmwiki/pmwiki.php?n=Manual.NEWA#toc|Return to TOC]]-----]
to:
!![[#status]]Status [-----[[#toc|Return to TOC]]-----]
Changed lines 32-33 from:
!![[#config]]|Configuration [-----[[http://gbpvr.com/nwiki/pmwiki/pmwiki.php?n=Manual.NEWA#toc|Return to TOC]]-----]
to:
!![[#config]]Configuration [-----[[#toc|Return to TOC]]-----]
Changed line 40 from:
!![[#install]]Installation [-----[[http://gbpvr.com/nwiki/pmwiki/pmwiki.php?n=Manual.NEWA#toc|Return to TOC]]-----]
to:
!![[#install]]Installation [-----[[#toc|Return to TOC]]-----]
February 04, 2011, at 02:28 AM by UncleJohnsBand -
Changed lines 24-25 from:
* [[http://gbpvr.com/nwiki/pmwiki/pmwiki.php?n=Manual.NEWA.config|Configuration]]
* [[http://gbpvr.com/nwiki/pmwiki/pmwiki.php?n=Manual.NEWA.install|Install Instructions]]
to:
* [[#config|Configuration]]
* [[#install|Install Instructions]]
February 04, 2011, at 02:27 AM by UncleJohnsBand -
Changed line 23 from:
* [[http://gbpvr.com/nwiki/pmwiki/pmwiki.php?n=Manual.NEWA.status|Current Status]]
to:
* [[#status|Current Status]]
February 04, 2011, at 02:21 AM by UncleJohnsBand -
Changed lines 23-25 from:
* [[http://gbpvr.com/nwiki/pmwiki/pmwiki.php?n=Manual.NEWA#status|Current Status]]
* [[http://gbpvr.com/nwiki/pmwiki/pmwiki.php?n=Manual.NEWA#config|Configuration]]
* [[http://gbpvr.com/nwiki/pmwiki/pmwiki.php?n=Manual.NEWA#install|Install Instructions]]
to:
* [[http://gbpvr.com/nwiki/pmwiki/pmwiki.php?n=Manual.NEWA.status|Current Status]]
* [[http://gbpvr.com/nwiki/pmwiki/pmwiki.php?n=Manual.NEWA.config|Configuration]]
* [[http://gbpvr.com/nwiki/pmwiki/pmwiki.php?n=Manual.NEWA.install|Install Instructions]]
February 04, 2011, at 02:20 AM by UncleJohnsBand -
Changed lines 28-29 from:
!![[NEWA#status]]Status [-----[[http://gbpvr.com/nwiki/pmwiki/pmwiki.php?n=Manual.NEWA#toc|Return to TOC]]-----]
to:
!![[#status]]Status [-----[[http://gbpvr.com/nwiki/pmwiki/pmwiki.php?n=Manual.NEWA#toc|Return to TOC]]-----]
Changed lines 32-33 from:
!![[NEWA#config]]|Configuration [-----[[http://gbpvr.com/nwiki/pmwiki/pmwiki.php?n=Manual.NEWA#toc|Return to TOC]]-----]
to:
!![[#config]]|Configuration [-----[[http://gbpvr.com/nwiki/pmwiki/pmwiki.php?n=Manual.NEWA#toc|Return to TOC]]-----]
Changed line 40 from:
!![[NEWA#install]]Installation [-----[[http://gbpvr.com/nwiki/pmwiki/pmwiki.php?n=Manual.NEWA#toc|Return to TOC]]-----]
to:
!![[#install]]Installation [-----[[http://gbpvr.com/nwiki/pmwiki/pmwiki.php?n=Manual.NEWA#toc|Return to TOC]]-----]
February 04, 2011, at 02:19 AM by UncleJohnsBand -
Changed lines 28-29 from:
!![[Manual.NEWA#status]]Status [-----[[http://gbpvr.com/nwiki/pmwiki/pmwiki.php?n=Manual.NEWA#toc|Return to TOC]]-----]
to:
!![[NEWA#status]]Status [-----[[http://gbpvr.com/nwiki/pmwiki/pmwiki.php?n=Manual.NEWA#toc|Return to TOC]]-----]
Changed lines 32-33 from:
!![[Manual.NEWA#config]]|Configuration [-----[[http://gbpvr.com/nwiki/pmwiki/pmwiki.php?n=Manual.NEWA#toc|Return to TOC]]-----]
to:
!![[NEWA#config]]|Configuration [-----[[http://gbpvr.com/nwiki/pmwiki/pmwiki.php?n=Manual.NEWA#toc|Return to TOC]]-----]
Changed line 40 from:
!![[Manual.NEWA#install]]Installation [-----[[http://gbpvr.com/nwiki/pmwiki/pmwiki.php?n=Manual.NEWA#toc|Return to TOC]]-----]
to:
!![[NEWA#install]]Installation [-----[[http://gbpvr.com/nwiki/pmwiki/pmwiki.php?n=Manual.NEWA#toc|Return to TOC]]-----]
February 04, 2011, at 02:18 AM by UncleJohnsBand -
Changed lines 28-29 from:
!![[#status|Status]] [-----[[http://gbpvr.com/nwiki/pmwiki/pmwiki.php?n=Manual.NEWA#toc|Return to TOC]]-----]
to:
!![[Manual.NEWA#status]]Status [-----[[http://gbpvr.com/nwiki/pmwiki/pmwiki.php?n=Manual.NEWA#toc|Return to TOC]]-----]
Changed lines 32-33 from:
!![[#config|Configuration]] [-----[[http://gbpvr.com/nwiki/pmwiki/pmwiki.php?n=Manual.NEWA#toc|Return to TOC]]-----]
to:
!![[Manual.NEWA#config]]|Configuration [-----[[http://gbpvr.com/nwiki/pmwiki/pmwiki.php?n=Manual.NEWA#toc|Return to TOC]]-----]
Changed line 40 from:
!![[#install]]Installation [-----[[http://gbpvr.com/nwiki/pmwiki/pmwiki.php?n=Manual.NEWA#toc|Return to TOC]]-----]
to:
!![[Manual.NEWA#install]]Installation [-----[[http://gbpvr.com/nwiki/pmwiki/pmwiki.php?n=Manual.NEWA#toc|Return to TOC]]-----]
February 04, 2011, at 02:16 AM by UncleJohnsBand -
Changed line 28 from:
!![[#status]]Status [-----[[http://gbpvr.com/nwiki/pmwiki/pmwiki.php?n=Manual.NEWA#toc|Return to TOC]]-----]
to:
!![[#status|Status]] [-----[[http://gbpvr.com/nwiki/pmwiki/pmwiki.php?n=Manual.NEWA#toc|Return to TOC]]-----]
February 04, 2011, at 02:15 AM by UncleJohnsBand -
Changed line 32 from:
!![[#config]]Configuration [-----[[http://gbpvr.com/nwiki/pmwiki/pmwiki.php?n=Manual.NEWA#toc|Return to TOC]]-----]
to:
!![[#config|Configuration]] [-----[[http://gbpvr.com/nwiki/pmwiki/pmwiki.php?n=Manual.NEWA#toc|Return to TOC]]-----]
February 04, 2011, at 02:05 AM by UncleJohnsBand -
Changed lines 24-25 from:

to:
* [[http://gbpvr.com/nwiki/pmwiki/pmwiki.php?n=Manual.NEWA#config|Configuration]]
* [[http://gbpvr.com/nwiki/pmwiki/pmwiki.php?n=Manual.NEWA#install|Install Instructions]]


!![[#status]]Status [-----[[http://gbpvr.com/nwiki/pmwiki/pmwiki.php?n=Manual.NEWA#toc|Return to TOC]]-----]

The latest build bundled with NPVR 1.5.36 is based on build 1.13.

!![[#config]]Configuration [-----[[http://gbpvr.com/nwiki/pmwiki/pmwiki.php?n=Manual.NEWA#toc|Return to TOC]]-----]

Using the Settings option in NPVR select the MVP & Web tab:
* Enable Web server
* Set the username
* Set the password required to access the web-interface
* Set the port that NEWA will be made available on '''(do not use port 8080 as it will conflict with [[http://gbpvr.com/nwiki/pmwiki/pmwiki.php?n=Manual.NEWA#stream|Web Streaming Capabilities]])'''. 

!![[#install]]Installation [-----[[http://gbpvr.com/nwiki/pmwiki/pmwiki.php?n=Manual.NEWA#toc|Return to TOC]]-----]

* If you have not yet configured NPVR to run NEWA you will need to follow and complete the instructions in the Configuration section (above this section).
* Download a copy from a link above in the Status area
* Stop the NPVR Recording Service
* Delete all contents and directories in the \web folder ('''except''' for the bin directory...removing this will cause NPVR to reinstall the default version of NEWA)
* Delete only the taglib-sharp.dll, System.Web.Extensions.Design.dll, System.Web.Extensions.dll, eWorld.UI.dll, Rss.dll, Rss.pdb and Rss.Net.dll files from the web\bin directory
* Extract the zip into your NPVR data folder using the option to use directory names.  This will load all the files into your \web directory and subdirectories.
* Restart the NPVR Recording Service
* Hit Refresh in your Web Browser (important to reload cached files that might have changed)

* '''On some PC's the NPVR Recording Service service may need to have the "Allow service to interact with desktop" box checked for NEWA to work correctly.'''
February 04, 2011, at 01:42 AM by UncleJohnsBand -
Changed line 23 from:
* [[http://gbpvr.com/nwiki/pmwiki/pmwiki.php/Utility/EnhancedWebAdmin#status|Current Status]]
to:
* [[http://gbpvr.com/nwiki/pmwiki/pmwiki.php?n=Manual.NEWA#status|Current Status]]
February 04, 2011, at 01:41 AM by UncleJohnsBand -
Added lines 1-2:
|| border=0 width=80%
||NEWA is the web based interface into NPVR and is supported by [[~UncleJohnsBand]].||
Changed lines 5-25 from:
Thanks to UncleJohnsBand, NextPVR sports a spiffy web interface. Just point your web browser to http://machine_name_or_ip_address:8866, and enjoy (or http://localhost:8866 if you're on the same box). You can set an admin password for the configuration functions on the 'MVP & Web' tab in Settings.
to:
|| align=right
NPVR's rich web interface (NEWA) allows you to:
 
*View
your TV Guide
*Schedule Events
*Delete Events
*Search for Events
*Stream
(via VLC) or download recorded Events and Live TV
*Stream (via VLC) or download Music from your Music Library
*Stream (via VLC) or download Videos from your Video Library
*View your Photo Library in a web based photo gallery format
*Interoperability to other applications and systems via a full Web Service interface
*RSS Feed for recorded Events
*Auto search and record Events

Just point your web browser to http://machine_name_or_ip_address:8866, and enjoy (or http://localhost:8866 if you're on the same box)
. You can set an admin password for the configuration functions on the 'MVP & Web' tab in Settings.

![[#toc]]Table of Contents [--(TOC)--]:
* [[http://gbpvr.com/nwiki/pmwiki/pmwiki.php/Utility/EnhancedWebAdmin#status|Current Status]]

Changed line 3 from:
TODO
to:
Thanks to UncleJohnsBand, NextPVR sports a spiffy web interface. Just point your web browser to http://machine_name_or_ip_address:8866, and enjoy (or http://localhost:8866 if you're on the same box). You can set an admin password for the configuration functions on the 'MVP & Web' tab in Settings.
Changed line 1 from:
(:Thumb ManualWebAdmin1.png width=600 :)
to:
(:thumb ManualWebAdmin1.png :)
Changed line 1 from:
(:Thumb ManualWebAdmin1.png :)
to:
(:Thumb ManualWebAdmin1.png width=600 :)
Changed line 1 from:
Attach:ManualWebAdmin1.png
to:
(:Thumb ManualWebAdmin1.png :)
Changed lines 1-3 from:
@@ TODO @@
to:
Attach:ManualWebAdmin1.png

TODO
Added line 1:
@@ TODO @@

Page last modified on August 30, 2015, at 07:39 PM