Utility.HauppaugeSoftPVR History

Hide minor edits - Show changes to output

Changed line 12 from:
# Once the SoftPVR components have been installed, and you can see the Analogue tuner in NextPVR Settings-Devices, the WinTVx installer and batch file can be safely deleted.
to:
# Once the SoftPVR components have been installed, and you can see the Analogue tuner listed in NextPVR Settings-Devices, the WinTVx installer and batch file can be safely deleted.
Changed lines 11-12 from:
# Download and unzip the bat file from the link below and into the same directory. Run the bat file. NOTE: if you are using Windows 7 the command will need to be run with elevated privileges (right-click and select 'Run as Admin').
# Once the SoftPVR components have been installed, and you can see the Analogue tuner in npvr Settings-devices, the WinTVx installer and batch file can be safely deleted.
to:
# Download and unzip the bat file from the link below into the same directory. Run the bat file. NOTE: if you are using Windows 7 the bat file will need to be run with elevated privileges (right-click it and select 'Run as Admin').
# Once the SoftPVR components have been installed, and you can see the Analogue tuner in NextPVR Settings-Devices, the WinTVx installer and batch file can be safely deleted.
Changed lines 11-12 from:
# Download and run the bat file from same directory. If you are using Windows 7 the commands will need to be run with elevated privileges (right-click and select 'Run as Admin').
# Once the SoftPVR components have been installed,
the WinTVx installer and batch file can be safely deleted.
to:
# Download and unzip the bat file from the link below and into the same directory. Run the bat file. NOTE: if you are using Windows 7 the command will need to be run with elevated privileges (right-click and select 'Run as Admin').
# Once the SoftPVR components have been installed, and you can see the Analogue tuner in npvr Settings-devices
, the WinTVx installer and batch file can be safely deleted.
Changed line 10 from:
# Download the latest version of WinTV7 or WinTV8 from the %newwin% and save it in a directory.[[http://www.hauppauge.com/site/support/support_wintv7.html|Hauppauge support website]].
to:
# Download the latest version of WinTV7 or WinTV8 from the %newwin%[[http://www.hauppauge.com/site/support/support_wintv7.html|Hauppauge support website]] and save it in a directory. Do not run the installer.
Changed line 10 from:
# Download the latest version of WinTV7 or WinTV8 from the %newwin%[[http://www.hauppauge.com/site/support/support_wintv7.html|Hauppauge support website]].
to:
# Download the latest version of WinTV7 or WinTV8 from the %newwin% and save it in a directory.[[http://www.hauppauge.com/site/support/support_wintv7.html|Hauppauge support website]].
Changed lines 21-22 from:
Download:SoftPVR.zip      (DownloadCount:SoftPVR.zip downloads) 
  '''(unzip, then right-click on batch file and select 'Run as Admin')''' (updated version for use with WinTV8 or WinTV7)
to:
Download:SoftPVR.zip      (DownloadCount:SoftPVR.zip downloads) (updated version for use with WinTV8 or WinTV7)  (unzip, then right-click on batch file and select "Run as Admin")
Changed lines 5-6 from:
Download and install the latest version of WinTV7 from the %newwin%[[http://www.hauppauge.com/site/support/support_wintv7.html|Hauppauge support website]]. Note that the installer requires that you have an earlier WinTV CD available and a supported Hauppauge device installed in your PC.
to:
Download and install the latest version of WinTV7 or WinTV8 from the %newwin%[[http://www.hauppauge.com/site/support/support_wintv7.html|Hauppauge support website]]. Note that the installer requires that you have an earlier WinTV CD available and a supported Hauppauge device installed in your PC.
Changed line 10 from:
# Download the latest version of WinTV7 from the %newwin%[[http://www.hauppauge.com/site/support/support_wintv7.html|Hauppauge support website]].
to:
# Download the latest version of WinTV7 or WinTV8 from the %newwin%[[http://www.hauppauge.com/site/support/support_wintv7.html|Hauppauge support website]].
Changed lines 12-17 from:
# Once the SoftPVR components have been installed, the WinTV7 installer and batch file can be safely deleted.

'''Please note''':  ''The following version works on either 32 or 64 bit windows, from XP through Win8. \\
The filename may change, but it must start with "wintv7_cd_".\\
[@  @]The batch file should be run with admin priveledges, but it may be placed anywhere as long as wintv7 download is in the same directory. \\
[=  =]The batch file will read npvr dir from registry, detect 32/64bit and admin rights, and only run newest file in same dir matching filespec [wintv7_cd_*.exe].''\\
to:
# Once the SoftPVR components have been installed, the WinTVx installer and batch file can be safely deleted.

'''Please note''':  ''The following version works on either 32 or 64 bit windows, from XP through Win10. \\
The filename may change, but it must start with "wintv".\\
[@  @]The batch file should be run with admin privileges, but it may be placed anywhere as long as the wintv* download is in the same directory. \\
[=  =]The batch file will read npvr dir from registry, detect 32/64bit and admin rights, and only run newest file in same dir matching filespec [wintv*.exe].''\\
Deleted lines 20-22:
Download:softPVR_beta.zip      (DownloadCount:softPVR_beta.zip downloads)  '''(unzip, then right-click on batch file and select 'Run as Admin')''' (updated version for WinTV7 3.2 (& later versions) - confirmed as working May 2014)

(Old out of date version) \\
Added lines 22-25:
  '''(unzip, then right-click on batch file and select 'Run as Admin')''' (updated version for use with WinTV8 or WinTV7)


Download:softPVR_beta.zip      (DownloadCount:softPVR_beta.zip downloads)' (version for WinTV7 3.2 (& later versions))
Changed lines 21-23 from:
Download:SoftPVR.zip      (DownloadCount:SoftPVR.zip downloads)  '''(unzip, then right-click on batch file and select 'Run as Admin')'''

Download:softPVR_beta.zip
       (DownloadCount:softPVR_beta.zip downloads) (updated version for WinTV7 3.2 - confirmed as working May 2014)
to:
Download:softPVR_beta.zip      (DownloadCount:softPVR_beta.zip downloads)  '''(unzip, then right-click on batch file and select 'Run as Admin')''' (updated version for WinTV7 3.2 (& later versions) - confirmed as working May 2014)

(Old out of date version) \\
Download:SoftPVR.zip      (DownloadCount:SoftPVR.zip downloads) 

Changed line 23 from:
Download:softPVR_beta.zip      (DownloadCount:softPVR_beta.zip downloads) (updated version for WinTV7 3.2)
to:
Download:softPVR_beta.zip      (DownloadCount:softPVR_beta.zip downloads) (updated version for WinTV7 3.2 - confirmed as working May 2014)
Added lines 22-23:

Download:softPVR_beta.zip      (DownloadCount:softPVR_beta.zip downloads) (updated version for WinTV7 3.2)
Changed line 19 from:
[EDIT: repaired for 64 bit changes in reg.exe]
to:
%red%[EDIT: repaired for 64 bit changes in reg.exe]
Changed line 18 from:
[Author:pBS]
to:
[Author:pBS] \\
Changed lines 18-19 from:
[Author:pBS]
to:
[Author:pBS]
[EDIT: repaired for 64 bit changes in reg.exe
]
Changed line 14 from:
'''Please note''':'''''The following version works on either 32 or 64 bit windows, from XP through Win8. \\
to:
'''Please note''':  ''The following version works on either 32 or 64 bit windows, from XP through Win8. \\
Changed line 17 from:
[=  =]The batch file will read npvr dir from registry, detect 32/64bit and admin rights, and only run newest file in same dir matching filespec [wintv7_cd_*.exe].'''''\\
to:
[=  =]The batch file will read npvr dir from registry, detect 32/64bit and admin rights, and only run newest file in same dir matching filespec [wintv7_cd_*.exe].''\\
Changed lines 14-16 from:
'''Please note''':''The following version works on either 32 or 64 bit windows, from XP through Win8. \\The filename may change, but it must start with "wintv7_cd_".\\''
[=  =]The batch file should be run with admin priveledges, but it may be placed anywhere as long as wintv7 download is in the same directory. \\
[=  =]The batch file will read npvr dir from registry, detect 32/64bit and admin rights, and only run newest file in same dir matching filespec [wintv7_cd_*.exe].''\\
to:
'''Please note''':'''''The following version works on either 32 or 64 bit windows, from XP through Win8. \\
The filename may change, but it must start with "wintv7_cd_".\\
[@  @]The batch file should be run with admin priveledges, but it may be placed anywhere as long as wintv7 download is in the same directory. \\
[=  =]The batch file will read npvr dir from registry, detect 32/64bit and admin rights, and only run newest file in same dir matching filespec [wintv7_cd_*.exe].'''''\\
Changed lines 15-16 from:
->''The batch file should be run with admin priveledges, but it may be placed anywhere as long as wintv7 download is in the same directory. ''\\
->''The batch file will read npvr dir from registry, detect 32/64bit and admin rights, and only run newest file in same dir matching filespec [wintv7_cd_*.exe].''\\
to:
[=  =]The batch file should be run with admin priveledges, but it may be placed anywhere as long as wintv7 download is in the same directory. \\
[=  =]The batch file will read npvr dir from registry, detect 32/64bit and admin rights, and only run newest file in same dir matching filespec [wintv7_cd_*.exe].''\\
Changed lines 14-16 from:
'''Please note''':''The following version works on either 32 or 64 bit windows, from XP through Win8. \\The filename may change, but it must start with "wintv7_cd_".\\
->The batch file should be run with admin priveledges, but it may be placed anywhere as long as wintv7 download is in the same directory. \\
->The batch file will read npvr dir from registry, detect 32/64bit and admin rights, and only run newest file in same dir matching filespec [wintv7_cd_*.exe].''\\
to:
'''Please note''':''The following version works on either 32 or 64 bit windows, from XP through Win8. \\The filename may change, but it must start with "wintv7_cd_".\\''
->''The batch file should be run with admin priveledges, but it may be placed anywhere as long as wintv7 download is in the same directory. ''\\
->''The batch file will read npvr dir from registry, detect 32/64bit and admin rights, and only run newest file in same dir matching filespec [wintv7_cd_*.exe].''\\
Changed lines 15-16 from:
The batch file should be run with admin priveledges, but it may be placed anywhere as long as wintv7 download is in the same directory. \\
The batch file will read npvr dir from registry, detect 32/64bit and admin rights, and only run newest file in same dir matching filespec [wintv7_cd_*.exe].''\\
to:
->The batch file should be run with admin priveledges, but it may be placed anywhere as long as wintv7 download is in the same directory. \\
->The batch file will read npvr dir from registry, detect 32/64bit and admin rights, and only run newest file in same dir matching filespec [wintv7_cd_*.exe].''\\
Changed line 19 from:
Download:SoftPVR.zip      (DownloadCount:SoftPVR.zip downloads)  '''(right-click and select 'Run as Admin')'''
to:
Download:SoftPVR.zip      (DownloadCount:SoftPVR.zip downloads)  '''(unzip, then right-click on batch file and select 'Run as Admin')'''
Changed line 16 from:
The batch file will read npvr dir from registry, detect 32/64bit and admin rights, and only run newest file matching filespec [wintv7_cd_*.exe].''\\
to:
The batch file will read npvr dir from registry, detect 32/64bit and admin rights, and only run newest file in same dir matching filespec [wintv7_cd_*.exe].''\\
Changed line 16 from:
The batch file will read npvr dir from registry, and detect 32/64bit and admin rights.''\\
to:
The batch file will read npvr dir from registry, detect 32/64bit and admin rights, and only run newest file matching filespec [wintv7_cd_*.exe].''\\
Changed line 12 from:
# Once the SoftPVR components have been installed the WinTV7 installer and batch file can be safely deleted.
to:
# Once the SoftPVR components have been installed, the WinTV7 installer and batch file can be safely deleted.
Changed line 16 from:
The batch file will read npvr dir from registry, and detect 32/64bit and admin rights.''
to:
The batch file will read npvr dir from registry, and detect 32/64bit and admin rights.''\\
Changed line 15 from:
The batch file should be '''run with admin priveledges''', but it may be placed anywhere as long as wintv7 download is in the same directory. \\
to:
The batch file should be run with admin priveledges, but it may be placed anywhere as long as wintv7 download is in the same directory. \\
Changed line 19 from:
Download:SoftPVR.zip      (DownloadCount:SoftPVR.zip downloads)
to:
Download:SoftPVR.zip      (DownloadCount:SoftPVR.zip downloads)  '''(right-click and select 'Run as Admin')'''
Changed line 14 from:
'''Please note''':''The following version works on either 32 or 64 bit windows, from XP through Win8. The filename may change, but it must start with "wintv7_cd_".\\
to:
'''Please note''':''The following version works on either 32 or 64 bit windows, from XP through Win8. \\The filename may change, but it must start with "wintv7_cd_".\\
Changed lines 14-15 from:
'''Please note''':''The following version works on either 32 or 64 bit windows, from XP through Win8. The filename may change, but it must start with "wintv7_cd_".''
''
The batch file should be '''run with admin priveledges''', but it may be placed anywhere as long as wintv7 download is in the same directory. The batch file will read npvr dir from registry, and detect 32/64bit and admin rights.''
to:
'''Please note''':''The following version works on either 32 or 64 bit windows, from XP through Win8. The filename may change, but it must start with "wintv7_cd_".\\
The batch file should be '''run with admin priveledges''', but it may be placed anywhere as long as wintv7 download is in the same directory. \\
The batch file will read npvr dir from registry, and detect 32/64bit and admin rights.''
Changed line 15 from:
''The batch file should be run with admin priveledges, but it may be placed anywhere as long as wintv7 download is in the same directory. The batch file will read npvr dir from registry, and detect 32/64bit and admin rights.''
to:
''The batch file should be '''run with admin priveledges''', but it may be placed anywhere as long as wintv7 download is in the same directory. The batch file will read npvr dir from registry, and detect 32/64bit and admin rights.''
Changed lines 14-15 from:
'''Please note''':   ''The following version works on either 32 or 64 bit windows, from XP through Win8.
The filename may change, but it must start with "wintv7_cd_".''
to:
'''Please note''':''The following version works on either 32 or 64 bit windows, from XP through Win8. The filename may change, but it must start with "wintv7_cd_".''
Changed lines 10-17 from:
# Create the folder SoftPVR in the NextPVR program folder (eg "C:\Program Files\npvr\SoftPVR").
# Download the latest version of WinTV7 from the %newwin%[[http://www
.hauppauge.com/site/support/support_wintv7.html|Hauppauge support website]] and copy it to this new folder.
# Download and
run the bat file suitable for your system. If you are using Windows 7 the commands will need to be run with elevated privileges (right-click and select 'Run as Admin').
# Once the SoftPVR components have been installed the WinTV7 installer can be safely deleted
.

'''Please note''': ''The following version works on either 32 or 64 bit windows, from XP through Win8
.
The filename may change, but it must start with "wintv7_cd_".
The batch file should be run with admin priveledges, but it may be placed anywhere as long as wintv7 download is in the same directory. The batch file will read npvr dir from registry, and detect 32/64bit and admin rights.''
to:
# Download the latest version of WinTV7 from the %newwin%[[http://www.hauppauge.com/site/support/support_wintv7.html|Hauppauge support website]].
# Download and run the bat file from same directory
. If you are using Windows 7 the commands will need to be run with elevated privileges (right-click and select 'Run as Admin').
# Once the SoftPVR components have been installed the WinTV7 installer and batch file can be safely deleted.

'''Please note''':  ''The following version works on either 32 or 64 bit windows, from XP through Win8.
The filename may change, but it must start with "wintv7_cd_".''
''The
batch file should be run with admin priveledges, but it may be placed anywhere as long as wintv7 download is in the same directory. The batch file will read npvr dir from registry, and detect 32/64bit and admin rights.''
Changed lines 15-20 from:
'''Please note''': ''The following bat files are configured for installing from WinTV7 v'''2.8a'''. For other versions of WinTV7 the bat file will need editing (in notepad) to change the version number of WinTV7 that has been downloaded.''

Download:SoftPVR_32bit.zip (DownloadCount:SoftPVR_32bit.zip downloads)

Download:SoftPVR_64bit.zip (DownloadCount:SoftPVR_64bit.zip
downloads)
to:
'''Please note''': ''The following version works on either 32 or 64 bit windows, from XP through Win8.
The filename may change, but it must start with "wintv7_cd_".
The batch file should be run with admin priveledges, but it may be placed anywhere as long as wintv7 download is in the same directory. The batch file will read npvr dir from registry, and detect 32/64bit and admin rights.''
[Author:pBS]

Download:SoftPVR.zip      (DownloadCount:SoftPVR.zip
downloads)
Changed line 15 from:
'''Please note''': ''The following bat files are configured for installing from WinTV7 v'''2.2'''. For other versions of WinTV7 the bat file will need editing (in notepad) to change the version number of WinTV7 that has been downloaded.''
to:
'''Please note''': ''The following bat files are configured for installing from WinTV7 v'''2.8a'''. For other versions of WinTV7 the bat file will need editing (in notepad) to change the version number of WinTV7 that has been downloaded.''
Changed line 5 from:
Download and install the latest version of WinTV7 from the %newwin%[http://www.hauppauge.com/site/support/support_wintv7.html|Hauppauge support website]]. Note that the installer requires that you have an earlier WinTV CD available and a supported Hauppauge device installed in your PC.
to:
Download and install the latest version of WinTV7 from the %newwin%[[http://www.hauppauge.com/site/support/support_wintv7.html|Hauppauge support website]]. Note that the installer requires that you have an earlier WinTV CD available and a supported Hauppauge device installed in your PC.
Changed lines 5-6 from:
Download and install the latest version of WinTV7 from the %newwin%[[http://www.hauppauge.co.uk/site/support/support_support.html|Hauppauge support website]]. Note that the installer requires that you have an earlier WinTV CD available and a supported Hauppauge device installed in your PC.
to:
Download and install the latest version of WinTV7 from the %newwin%[http://www.hauppauge.com/site/support/support_wintv7.html|Hauppauge support website]]. Note that the installer requires that you have an earlier WinTV CD available and a supported Hauppauge device installed in your PC.
Changed line 11 from:
# Download the latest version of WinTV7 from the %newwin%[[http://www.hauppauge.co.uk/site/support/support_support.html|Hauppauge support website]] and copy it to this new folder.
to:
# Download the latest version of WinTV7 from the %newwin%[[http://www.hauppauge.com/site/support/support_wintv7.html|Hauppauge support website]] and copy it to this new folder.
Changed line 15 from:
Please note: ''The following bat files are configured for installing from WinTV7 v'''2.2'''. For other versions of WinTV7 the bat file will need editing (in notepad) to change the version number of WinTV7 that has been downloaded.''
to:
'''Please note''': ''The following bat files are configured for installing from WinTV7 v'''2.2'''. For other versions of WinTV7 the bat file will need editing (in notepad) to change the version number of WinTV7 that has been downloaded.''
Added lines 14-15:

Please note: ''The following bat files are configured for installing from WinTV7 v'''2.2'''. For other versions of WinTV7 the bat file will need editing (in notepad) to change the version number of WinTV7 that has been downloaded.''
Changed lines 15-17 from:
Attach:SoftPVR_32bit.zip

Attach
:SoftPVR_64bit.zip
to:
Download:SoftPVR_32bit.zip (DownloadCount:SoftPVR_32bit.zip downloads)

Download:SoftPVR_64bit.zip (DownloadCount:SoftPVR_64bit.zip downloads)
Changed line 8 from:
For those that don't want to install the full Hauppauge WinTV suite or have lost their original CD, NextPVR users have reported they can download the latest WinTV7 release and extract and install only the required files using the commands below.
to:
For those that don't want to install the full Hauppauge WinTV suite or have lost their original CD, NextPVR users have reported that it is possible to download and install only the required files using the commands below.
Changed lines 12-13 from:
# Download and run the bat file suitable for your system:
to:
# Download and run the bat file suitable for your system. If you are using Windows 7 the commands will need to be run with elevated privileges (right-click and select 'Run as Admin').
# Once the SoftPVR components have been installed the WinTV7 installer can be safely deleted.

Deleted lines 17-20:

''Notes''\
If you are using Windows 7 the commands will need to be run with elevated privileges, 'run as Admin').\\
Once the SoftPVR has been installed the WinTV7 installer can be safely deleted.
Changed lines 14-16 from:
Attach:SoftPVR_32bit.bat

Attach:SoftPVR_64bit.bat
to:
Attach:SoftPVR_32bit.zip

Attach:SoftPVR_64bit.zip
Changed lines 2-18 from:
[+''Hauppauge SoftPVR™'' is the name for software components which add support to NextPVR for analog devices with software encoding tuners.+]

!! Download and install
As these components are licensed and owned by Hauppauge they cannot be made available to download from here. Luckily there are a number of alternative sources:

!!! Option 1: Install Hauppauge WinTV7
Download and install WinTV7 from the %newwin%[[http://www.hauppauge.co.uk/site/support/support_support.html|Hauppauge support site]]. This is
the simplest method but requires that you have an earlier WinTV CD available AND have a supported Hauppauge device installed.

!!! Option 2: Extract SoftPVR components from the WinTV7 installer using 7-zip
Extract
the file using 7-zip (or similar), then further extract the WINTV7SETUP.EXE file. From the extracted WINTV7SETUP files, copy hcw_*.* to a directory, and register the three .ax files (using  regsvr32). [[http://rsteinbu.dyndns.org/files/drivers/Hauppauge/hvr900/WinTV7_CD_1.1b.exe|This version of WinTV]] is known to work, later versions found on the Hauppage support site may not.

(:thumb ExtractingWinTVAXFilesWith7Zip.png
:)

!!! Option 3
: Extract SoftPVR™ components from the WinTV installer using other tools
If you are familiar
with installer extraction tools such as %newwin%[[http://legroom.net/software/uniextract|Uniextract]] then you can use them to extract the required components from a  WinTV7 installer.

Options 2 and 3 do not require a supported Hauppauge device to be present in your computer
.
to:
[+''Hauppauge SoftPVR™'' is the name for software components which add support to NextPVR for analog devices.+]

!! Option 1
Download
and install the latest version of WinTV7 from the %newwin%[[http://www.hauppauge.co.uk/site/support/support_support.html|Hauppauge support website]]. Note that the installer requires that you have an earlier WinTV CD available and a supported Hauppauge device installed in your PC.

!! Option 2
For those that don't want to install
the full Hauppauge WinTV suite or have lost their original CD, NextPVR users have reported they can download the latest WinTV7 release and extract and install only the required files using the commands below.

# Create the folder SoftPVR in
the NextPVR program folder (eg "C:\Program Files\npvr\SoftPVR").
# Download the latest version of WinTV7 from
the %newwin%[[http://www.hauppauge.co.uk/site/support/support_support.html|Hauppauge support website]] and copy it to this new folder.
# Download and run
the bat file suitable for your system:

Attach
:SoftPVR_32bit.bat

Attach:SoftPVR_64bit.bat

''Notes''\
If you are using Windows 7 the commands will need to be run
with elevated privileges, 'run as Admin').\\
Once the SoftPVR has been installed the WinTV7 installer can be safely deleted
.
Deleted lines 9-10:
These methods do not require a supported Hauppauge device to be present in your computer.
Added lines 17-18:

Options 2 and 3 do not require a supported Hauppauge device to be present in your computer.
Changed line 7 from:
!!! Install Hauppauge WinTV7
to:
!!! Option 1: Install Hauppauge WinTV7
Changed line 12 from:
!!! Extract SoftPVR components from the WinTV7 installer using 7-zip
to:
!!! Option 2: Extract SoftPVR components from the WinTV7 installer using 7-zip
Changed line 17 from:
!!! Extract SoftPVR™ components from the WinTV installer using other tools
to:
!!! Option 3: Extract SoftPVR™ components from the WinTV installer using other tools
Changed line 1 from:
(:title Hauppauge SoftPVR:)
to:
(:title Hauppauge SoftPVR™:)
Changed lines 2-3 from:
[+''Hauppage SoftPVR™'' is the name for software components which add support to NextPVR for analog devices with software encoding tuners.+]
to:
[+''Hauppauge SoftPVR™'' is the name for software components which add support to NextPVR for analog devices with software encoding tuners.+]
Changed line 7 from:
!!! Install Hauppage WinTV7
to:
!!! Install Hauppauge WinTV7
Changed line 17 from:
!!! Extract SoftPVR components from the WinTV installer using other tools
to:
!!! Extract SoftPVR™ components from the WinTV installer using other tools
Added line 1:
(:title Hauppauge SoftPVR:)
Changed line 1 from:
[+''Hauppage SoftPVR'' is the name for software components which add support to NextPVR for analog devices with software encoding tuners.+]
to:
[+''Hauppage SoftPVR™'' is the name for software components which add support to NextPVR for analog devices with software encoding tuners.+]
Changed line 14 from:
Attach:ExtractingWinTVAXFilesWith7Zip.png
to:
(:thumb ExtractingWinTVAXFilesWith7Zip.png :)
Added lines 13-14:

Attach:ExtractingWinTVAXFilesWith7Zip.png
Changed lines 1-8 from:
[+Hauppage SoftPVR is the name for some components (dlls) which allow NextPVR to use analog devices which use software encoding tuners.+]

!! Where to download
As these components are licensed and owned by Hauppauge they cannot be hosted here for download.
...

!! How to
install
...
to:
[+''Hauppage SoftPVR'' is the name for software components which add support to NextPVR for analog devices with software encoding tuners.+]

!! Download and install
As these components are licensed and owned by Hauppauge they cannot be made available to download from here. Luckily there are a number of alternative sources:

!!! Install Hauppage WinTV7
Download and
install WinTV7 from the %newwin%[[http://www.hauppauge.co.uk/site/support/support_support.html|Hauppauge support site]]. This is the simplest method but requires that you have an earlier WinTV CD available AND have a supported Hauppauge device installed.

These methods do not require a supported Hauppauge device to be present in your computer.

!!! Extract SoftPVR components from the WinTV7 installer using 7-zip
Extract the file using 7-zip (or similar), then further extract the WINTV7SETUP.EXE file. From the extracted WINTV7SETUP files, copy hcw_*.* to a directory, and register the three .ax files (using  regsvr32). [[http://rsteinbu.dyndns.org/files/drivers/Hauppauge/hvr900/WinTV7_CD_1.1b.exe|This version of WinTV]] is known to work, later versions found on the Hauppage support site may not.

!!! Extract SoftPVR components from the WinTV installer using other tools
If you are familiar with installer extraction tools such as %newwin%[[http://legroom.net/software/uniextract|Uniextract]] then you can use them to extract the required components from a  WinTV7 installer
.
Added lines 1-11:
[+Hauppage SoftPVR is the name for some components (dlls) which allow NextPVR to use analog devices which use software encoding tuners.+]

!! Where to download
As these components are licensed and owned by Hauppauge they cannot be hosted here for download.
...

!! How to install
...

----
Category:[[!Utility]]

Page last modified on October 26, 2015, at 12:27 AM